manager@eworkaccesscontrol.com

Newest RFID Card Reader Access Control Products

2018-11-06 16:01:18

Newest RFID Card Reader Access Control Products 


RFID Card reader, which is available to EM4100, EM4200, TK4100 and compatible cards, With Wiegand26,34, RS232, RS485, interface optional, easy to use and deploy, fast and convenient to connect with other controlling devices.Widely used in applications such as access control system, timeattendance, guest registration system and identification authentication field etc.

 

Item

Parameters

Product name

13.56Mhz MF IC Card Reader

Material

ABS 

Frequency

125KHz (optional 13.56MHz)

Support cards

TK4001/ EM4100 etc.(optional 13.56MHz Mifare)

Read Range

3-8cm

Operating Voltage

DC 9V-16V

Consumed Current

<60mA

Reader Interval

<0.5S

Format

Wiegand 26/ Wiegand 34/ RS232/ RS485 (optional)

Distance of Transmission

WG26/34<100M, RS232<10M, RS485<1200M

Operating Temperature

-25℃ ~ +75℃

Size

100*100*21(mm)

Status Indication

LED (Red for standby, Green for reading card)

 

Specification

*Less than 0.2 second Response Speed
*5-10cm Proximity Range
*Support EM-ID, M1card, 15693card, 14443A or 14443B Card
*Ambient Temperature:-25 to 75
*Ambient Humidity: 10%-90% 

*Built-in Antenna
*Built-in LED (Double Color LED)
*Built-in Loud Speaker (Buzzer)
*DC 9V-12V Working Voltage. Standard 12V, 70mA Working Current
*90 Meters Communication Distance
*Real Time Data Transfer
*With Water-Proof Function
*Audiovisual indication:When a registered card is presented to the reader,the red LED flashes green and the beep sounds.

 

Installation
Using + type screw driver to loosen the screw between the panel and mother board, then embed the motherboard to the side wall with the plastic plug and screws.

5 to 10 cm short range 125 KHz or 13.56 MHz reader

Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires.

 

5 to 10 cm short range 125 KHz or 13.56 MHz reader


Related Products