Q30-C/Q Waterproof Dynamic Metal Case QR Code mifare PIN keypad Access Door Controller
*QR Code Door controller is new developed access controller, support QR code+RFID Card
*Advanced CMOS image recognition technology, intelligent image recognition system, scan code recognition rate of high speed.
*Large capacity storage (10,000 user card information).
*High security, simple operation, dynamic QR code APP+ card + password three ways to open the door.
*Also can be used as Wiegand QR mifare PIN Keypad reader.
Parameter
Products Features | communication | Offline |
Management | 6 digit Password （Q10-C/Q non-keypad no this function） |
App | Quicklopen |
Reading card type | MF Card |
Reading Range | MF:1～3cm，QR Code:1～20cm |
Card Capacity | ≥10000 cards |
Door opening mode | App,Card,Password（Q10-C/Q non-keypad no this function） |
Prompt mode | Buzzer sound, Blue work light on, green light flashes |
Camera pixel | 300000 pixels |
Scan resolution | 640*480 |
Reading angle | Rotate 360 °, tilt ± 45 °, deflection ± 45 ° |
Keypad Type | Press |
Open door time | 0～99s |
Parameters | Work voltage | DC12V |
Work current | 100mA |
| Size | 120×80×18（mm） |
Install hole space | 60 mm |
Packing list | （Dynamic QR Code Standalone Controller 、8P wire、manual）×1 |
Working environment | Working temperature | -10~60℃ |
Working humidity | 5%-85% |
|
8P Socket Wire connection | Wire S/N | Color | Interface | illustrate |
1 | Red | DC12V | Cathode |
2 | Black | GND | GND |
3 | Yellow | NC | Relay NC |
4 | White | COM | COM |
5 | Black | NO | Relay NO |
6 | Green | OPNE | Exit button |
7 | Yellow | BEEP | Doorbell |
8 | Blue | BEEP |
