Dynamic QR Code Standalone Controller
Products introduction
Q20-C/Q is our independent research and development production, good performance QR code+RFID Card Standalone controller .Advanced CMOS image recognition technology, intelligent image recognition system, scan code recognition rate of high speed, large capacity storage (10,000 user card information), high security, simple operation, complete functions, dynamic QR code APP+ card + password three ways to open the door
Parameter
Dynamic QR Code Standalone Controller Q20-C/Q |
Products Features | communication | Offline |
Management | 6 digit Password （Q10-C/Q non-keypad no this function） |
App | Quicklopen |
Reading card type | MF Card |
Reading Range | MF:1～3cm，QR Code:1～20cm |
Card Capacity | ≥10000 cards |
Door opening mode | App,Card,Password（Q10-C/Q non-keypad no this function） |
Prompt mode | Buzzer sound, Blue work light on, green light flashes |
Camera pixel | 300000 pixels |
Scan resolution | 640*480 |
Reading angle | Rotate 360 °, tilt ± 45 °, deflection ± 45 ° |
Keypad Type | Press （Q10-C/Q Non-keypad） |
Open door time | 0～99s |
Door ell function | with Doorbell button（Q10-C/Q no Doorbell keypad） |
Electrical parameters | Work voltage | DC12V |
Work current | 100mA |
Appearance and
packing | Color and material | Black Plastic ABS |
Size | 120×80×18（mm） |
Install hole space | 60 mm |
Packing list | （Dynamic QR Code Standalone Controller 、8P wire、manual）×1 |
Working environment | Working temperature | -10~60℃ |
Working humidity | 5%-85% |
|
8P Socket Wire connection | Wire S/N | Color | Interface | illustrate |
1 | Red | DC12V | Cathode |
2 | Black | GND | GND |
3 | Yellow | NC | Relay NC |
4 | White | COM | COM |
5 | Black | NO | Relay NO |
6 | Green | OPNE | Exit button |
7 | Yellow | BEEP | Doorbell |
8 | Blue | BEEP |
