Plastic Standalone Controller Touch Screen Door Access Controller
Features:
Standalone, single door control.
Low Priced, connect an electric strike and power supply and you're done
No Control Panels - Standalone Access Controller
Easy and simple to use
Has a flat back so it's easy to install on any flat surface
Operating Mode: Card only, Keypad only, Card with Keypad.
Card capacity is 1600 users.
Programmable door release time: 1~250 seconds
Access code can be added or deleted by keypad management.
Built-in electric buzzer for audible card entry and programming.
Data is protected even after power failure.
Machined housing in high durable.
ISO Mifare one /EM-ID thin card or keyfob optional
Specifications
Display: Red-power pilot, Black-access granted, Yellow-Beep
Keypad: 3 x 4 Flat membranes
Power: DC12V 3Amp
Color: White
Frequency: 13.56 MHz or 125 kHz
Temperature:(-10°C~70°C)
Humidity: 10%~90%RH
Reading range: Within 10cm
Warranty: 1 Year
Dynamic QR Code Standalone Controller Q20-C/Q | ||||
Products Features | communication | Offline | ||
Management | 6 digit Password （Q10-C/Q non-keypad no this function） | |||
App | Quicklopen | |||
Reading card type | MF Card | |||
Reading Range | MF:1～3cm，QR Code:1～20cm | |||
Card Capacity | ≥10000 cards | |||
Door opening mode | App,Card,Password（Q10-C/Q non-keypad no this function） | |||
Prompt mode | Buzzer sound, Blue work light on, green light flashes | |||
Camera pixel | 300000 pixels | |||
Scan resolution | 640*480 | |||
Reading angle | Rotate 360 °, tilt ± 45 °, deflection ± 45 ° | |||
Keypad Type | Press （Q10-C/Q Non-keypad） | |||
Open door time | 0～99s | |||
Door ell function | with Doorbell button（Q10-C/Q no Doorbell keypad） | |||
Electrical parameters | Work voltage | DC12V | ||
Work current | 100mA | |||
Appearance and packing | Color and material | Black Plastic ABS | ||
Size | 120×80×18（mm） | |||
Install hole space | 60 mm | |||
Packing list | （Dynamic QR Code Standalone Controller 、8P wire、manual）×1 | |||
Working environment | Working temperature | -10~60℃ | ||
Working humidity | 5%-85% | |||
8P Socket Wire connection | Wire S/N | Color | Interface | illustrate |
1 | Red | DC12V | Cathode | |
2 | Black | GND | GND | |
3 | Yellow | NC | Relay NC | |
4 | White | COM | COM | |
5 | Black | NO | Relay NO | |
6 | Green | OPNE | Exit button | |
7 | Yellow | BEEP | Doorbell | |
8 | Blue | BEEP | ||
